|
|
|
Laboratory pH Electrodes
pH electrode with internal preamplifier
|
|
Cat. No.: 2910DAPM |
Unit Price: $125.00 |
pH Range: 0 to 13 |
Temp. Range: -5 to 80 oC |
Body Type: polymer |
Dimensions: 12mm dia x 148.5mm length (3/4 x 16 UNF thread on cap for mounting) |
Internal ref.: Double junction sealed |
Description:
Polymer body combination pH electrode with internal electronic preamplifier
which converts the high impedance millivolt signal (weak signal) from the ORP
electrode into a low impedance signal (strong signal) which can be transmitted
over long distances without any loss in signal. Can be connected to any
standard lab or industrial pH meter, monitor, or controller. |
Applications:
The pH electrode with preamplifier is ideally suited for both lab and industrial
application where there is high humidity, electrical noise, and excessive
cable length from the electrode to the the pH meter. This electrode can be
connected to a cable up to 150 feet (50 meters) without any loss of signal.
|
|
Choose your connector by clicking on the appropriate circle:
Note: There is a surcharge of $6.00 for radiometer or DIN connectors
|
Convenient methods of ordering
- Order Online: Simply follow the "buy" buttons on the bottom of product pages.
For your convenience, you may place the order online, but give credit card info by phone or fax. **You may
even place company purchase orders online**.
- Order by phone: 800-824-2066
- Order by fax: 323-931-1434
- Place a regular company purchase order
|
|
|
|
Operated by Lazar Research Laboratories, Inc.
|